Free Tools for Testing Communication Protocols

It is a regular task of those who work with automation systems, SCADA, etc., to configure the data exchanges between the devices, using communication protocols.

Often, these integrations between client and server devices are not easily obtainable. When a problem occurs, there is always a question of whether the cause is on the client or the server. In these cases, you can use third-party tools to simulate client and server systems, log communications so you can better analyze the problem.

In this article, I present some useful tools to perform tests and simulations of some communication protocols. There are many commercial tools for this purpose in the market, like ASE 2000 and Triangle Test Harness, but I will focus only on those that can be obtained free of charge and allow continued use without that typical 30-day limit of use.

Opendnp3 Simulator

2017-06-25 (2)

This tool is part of the Opendnp3 project, a very complete and excellent quality open source DNP3 protocol implementation.

The simulator allows you to do both the client and server roles. Protocol or TCP variants can be configured. You can create multiple devices. Quality values and bits can be edited for the generation of events in the protocol.

The logs produced are quite detailed and easy to understand, presenting separately the levels of binding, transport, and application.

To download this simulator, go to:

Https://automatak.com/opendnp3/simulator/setup.msi

IEC Server

1

This software simulates an IEC60870-5-104 protocol server.

You can add point by point to be made available by configuring information type, ASDU address, transmission cause, object address, and value. Timed simulation of values can be made or can be changed manually. The point database can be saved and reloaded later.

It is available at: https://sourceforge.net/projects/iecserver/ .

QTester104

1 (1)

This open source tool, developed by myself, allows to play the role of the client of protocol IEC60870-5-104, that is, it obtains data from a server.

The capabilities of the tool are:

  • Acquisition of various types of information (ASDU’s).
  • Sending digital and analog commands of various types.
  • Sending General Interrogation (GI) request.
  • Sending time synchronization.
  • Log of the protocol in a readable format that can be copied.
  • Exportable table with all acquired points, values, qualifiers, type of ASDU, cause, time tag, etc.

Available here: http://qtester104.sourceforge.net/ .

Modbus PLC Simulator

2017-06-25 (5)

Modbus open source slave simulator.

Allows entering the simulated data manually, by automatic animation or through VB script. Performs message logging. Import CSV file settings.

Link to download: http://www.plcsimulator.org/downloads .

IED Explorer

iedexp

This is a great open source tool to test IEC61850 devices.

It can inspect and write variables values in the tree structure of IEC61850, send commands, download files and also capture MMS packets.

Available here: https://sourceforge.net/projects/iedexplorer/.

Axon Test

tes2

This tool allows you to simulate several protocols in master and slave mode: Modbus DNP3, IEC 60870-101/103/104.

In freeware mode, you can only simulate one device at a time and you can not save the settings. Still, the tool is extremely useful.

The quality of the logs is very good. You can configure automatic value simulations, give feedback to commands in state points, generate events, etc.

To obtain it is necessary to register in the site:http://www.axongroup.com.co/downloads/.

Enilit CMS

Enilitcms-sshot.png

Last but not least, Enilit CMS is a complete protocol gateway software. This is without a doubt the best and most powerful free protocol testing tool available. The only limitation of the demonstration version is that after 12h of continuous use the gateway stops to distribute data, needing to be restarted to resume distribution.

Easy to use, Enilit CMS allows you to add, without limits, master and slave ports for the available protocols. The data acquired by one protocol can be distributed by others, combined as desired.

The slave protocols are IEC60870-5-101 / 104, DNP3 Serial and SPA-Bus. The master protocols are IEC61850, IEC60870-5-101 / 103 / 104, DNP3 Serial / TCP, Modbus Serial / TCP and SPA-Bus. Data simulators are also available.

All settings can be changed online, without restarting the system.

The quality of implementation of the protocols is excellent, with international certifications. The logs are very complete and detailed.

To obtain a download link of this software request it here:

http://www.enilit.lt/index.php?page=downloads

 

Copyright © 2017 Ricardo L. Olsen. All rights reserved.

Company: DSC Systems – https://dscsys.com

XPlain SCADA@cloud service.

#SCADA #PROTOCOLS #IEC61850 #IEC60870 #DNP3 #OPEN #SOURCE

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s